diff options
Diffstat (limited to 'media-libs/netpbm/files/10.11.4/Makefile.svga')
| -rw-r--r-- | media-libs/netpbm/files/10.11.4/Makefile.svga | 478 |
1 files changed, 478 insertions, 0 deletions
diff --git a/media-libs/netpbm/files/10.11.4/Makefile.svga b/media-libs/netpbm/files/10.11.4/Makefile.svga new file mode 100644 index 000000000000..43f6c65531ff --- /dev/null +++ b/media-libs/netpbm/files/10.11.4/Makefile.svga @@ -0,0 +1,478 @@ +####This file was automatically created by 'configure.' +####Many variables are set twice -- a generic setting, then +####a system-specific override at the bottom of the file. +#### +# This is a make file inclusion, to be included in all the Netpbm make +# files. + +# This file is meant to contain variable settings that customize the +# build for a particular target system configuration. + +# The distribution contains the file Makefile.config.in. You edit +# Makefile.config.in in ways relevant to your particular environment +# to create Makefile.config. The "configure" program will do this +# for you in simple cases. + +# Some of the variables that the including make file must set for this +# file to work: +# +# SRCDIR: The directory at the top of the Netpbm source tree. Note that +# this is typically a relative directory, and it must be relative to the +# make file that includes this file. So it's normally "..". + +DEFAULT_TARGET = nonmerge +#DEFAULT_TARGET = merge + +# Fiasco has some special requirements that make it fail to compile on +# some systems, and since it isn't very important, just set this to "N" +# and skip it on those systems unless you want to debug it and fix it. +# OpenBSD: +#BUILD_FIASCO = N +BUILD_FIASCO = Y + +# The following are commands for the build process to use. These values +# do not get built into anything. + +# The C compiler (including macro preprocessor) +#CC = gcc +# Note that 'cc' is usually an alias for whatever is the main compiler +# on a system, e.g. the GNU Compiler on Linux. +CC = cc + +# The linker. +LD = $(CC) +#LD = ld +#Tru64: +#LD = cc +#LD = gcc + +# CC and LD are for building the Netpbm programs, which are not necessarily +# intended to run on the same system on which Make is running. But when we +# build a build tool such as Libopt, it is meant to run only on the same +# system on which the Make is running. The variables below define programs +# to use to compile and link build tools. +CC_FOR_BUILD = $(CC) +LD_FOR_BUILD = $(LD) + +# MAKE is set automatically by Make to what was used to invoke Make. + +INSTALL = $(SRCDIR)/buildtools/install.sh +#Solaris: +#INSTALL = /usr/ucb/install +#Tru64: +#INSTALL = installbsd +#OSF1: +#INSTALL = $(SRCDIR)/buildtools/installosf +#Red Hat Linux: +#INSTALL = install + +# STRIPFLAG is the option you pass to the above install program to make it +# strip unnecessary information out of binaries. +STRIPFLAG = -s +# If you don't want to strip the binaries, just leave it null: +#STRIPFLAG = + +SYMLINK = ln -s +# At least some Windows environments don't have any concept of symbolic +# links, but direct copies are usually a passable alternative. +#SYMLINK = cp + +#MANPAGE_FORMAT is "nroff" or "cat". It determines in what format the +#pointer man pages are installed (ready to nroff, or ready to cat). +#A pointer man pages is just a single-paragraph pages that tells you there is +#no man page for the program, to look at the HTML documentation instead. +MANPAGE_FORMAT = nroff +#MANPAGE_FORMAT = cat + +AR = ar +RANLIB = ranlib +# IRIX, SCO don't have Ranlib: +#RANLIB = true +LEX = flex +# Solaris: +# LEX = flex -e +# Or just skip parts that need Lex: +# LEX = + +# C compiler options + +# gcc: +# -ansi and -Werror should work too, but are not included +# by default because there's no point in daring the build to fail. +# -pedantic isn't a problem because it causes at worst a warning. +#CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations +# The merged programs have a main_XXX subroutine instead of main(), +# which would cause a warning with -Wmissing-declarations +#CFLAGS_MERGE = -Wno-missing-declarations +# On DEC Tru64 4.0F (at least), you need -DLONG_32 for ppmtompeg. +#Tru64: +#CFLAGS = -O2 -std1 -DLONG_32 +#AIX: +#CFLAGS= -O3 -D_ALL_SOURCE +#HP-UX: +#CFLAGS= -O3 -fPIC + + +# EXE is a suffix that the linker puts on any executable it generates. +# In cygwin, this is .exe and most programs deal with its existence without +# us having to know about it. Some don't though, so set this: + +EXE = +#Cygwin, DJGPP/Windows: +#EXE = .exe + +# linker options. + +# On some systems you have to build into an executable the list of +# directories where its dynamically linked libraries can be found at +# run time. This is typically done with a -R or --rpath linker +# option. Even on systems that don't require it, you might prefer to do +# that rather than set up environment variables or configuration files +# to tell the system where the libraries are. A "Y" here means to put +# the directory information in the executable at link time. + +NEED_RUNTIME_PATH = N +# Solaris, SunOS, NetBSD: +#NEED_RUNTIME_PATH = Y + +LDFLAGS = +# Eunice users may want to use -noshare so that the executables can +# run standalone: +#LDFLAGS = -noshare +#Tru64: +# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary +# to keep from finding an ancient system libjpeg.so that isn't compatible with +# NetPBM. Michael Long found that /usr/local/lib is not in the default +# search path, or not soon enough, and he was getting an old libjpeg that +# caused all the jpeg symbol references to be unresolved. He had installed +# a new libjpeg in /usr/local/lib. +#LDFLAGS = -call_shared -oldstyle_liblookup -L/usr/local/lib +#AIX: +#LDFLAGS=-L /usr/pubsw/lib +#HP-UX: +#LDFLAGS = -Wl,+b,/usr/pubsw/lib +#FreeBSD: +#LDFLAGS = -L/usr/local/lib + +# Linker options for created Netpbm shared libraries. + +# Here, $(SONAME) resolves to the soname for the shared library being created. +# The following are gcc options. This works on GNU libc systems. +LDSHLIB = -shared -Wl,-soname,$(SONAME) +# You need -nostart instead of -shared on BeOS. Though the BeOS compiler is +# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc +# documentation and doesn't exist in at least one non-BeOS installation. +# BeOS doesn't have sonames built in. +#LDSHLIB = -nostart +#LDSHLIB = -G +# Solaris, SunOS with GNU Ld, SCO: +# These systems have no soname option. +#LDSHLIB = -shared +# Solaris with Sun Ld: +#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME) +#Tru64: +#LDSHLIB = -shared -expect_unresolved "*" +#AIX: +#LDSHLIB = ??? + +# On older systems, you have to make shared libraries out of position +# independent code, so you need -fpic or fPIC here. (The rule is: if +# -fpic works, use it. If it bombs, go to fPIC). On newer systems, +# it isn't necessary, but can save real memory at the expense of +# execution speed. Without position independent code, the library +# loader may have to patch addresses into the executable text. On an +# older system, this would cause a program crash because the loader +# would be writing into read-only shared memory. But on newer +# systems, the system silently creates a private mapping of the page +# or segment being modified (the "copy on write" phenomenon). So it +# needs its own private real page frame. In one experiment, A second +# copy of Pbmtext used 16K less real memory when built with -fpic than +# when built without. 2001.06.02. + +CFLAGS_SHLIB = +# Solaris or SunOS with gcc, and NetBSD: +#CFLAGS_SHLIB = -fpic +#CFLAGS_SHLIB = -fPIC +# Sun compiler: +#CFLAGS_SHLIB = -Kpic +#CFLAGS_SHLIB = -KPIC + +# SHLIB_CLIB is the link option to include the C library in a shared library, +# normally "-lc". On typical systems, this serves no purpose. On some, +# though, it causes information about which C library to use to be recorded +# in the shared library and thus choose the correct library among several or +# avoid using an incompatible one. But on some systems, the link fails. +# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on +# SCO OpenServer, he gets the following error message with -lc: +# +# -lc; relocations referenced ; from file(s) /usr/ccs/lib/libc.so(random.o); +# fatal error: relocations remain against allocatable but non-writable +# section: ; .text + +SHLIB_CLIB = -lc +# SCO: +SHLIB_CLIB = + +# The following variables tell where your various libraries on which +# Netpbm depends live. The LIBxxx variable is a full file +# specification of the link library (not necessarily the library used +# at run time). e.g. "/usr/local/lib/graphics/libpng.so". It usually +# doesn't matter if the library prefix and suffix are right -- you can +# use "lib" and ".so" or ".a" regardless of what your system actually +# uses because these just turn into "-L" and "-l" linker options +# anyway. ".a" implies a static library for some purposes, though. +# If you don't have the library in question, use a value of NONE for +# LIBxxx and the build will simply skip the programs that require that +# library. If the library is in your linker's (or the Netpbm build's) +# default search path, leave off the directory part, e.g. "libpng.so". + +# The xxxHDR_DIR variable is the directory in which the interface +# headers for the library live (e.g. /usr/include). If they are in your +# compiler's default search path, set this variable to null. + +# This is where the Netpbm shared libraries will reside when Netpbm is +# fully installed. In some configurations, the Netpbm builder builds +# this information into the Netpbm executables. This does NOT affect +# where the Netpbm installer installs the libraries. A null value +# means the libraries are in a default search path used by the runtime +# library loader. +NETPBMLIB_RUNTIME_PATH = +#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm + +# The TIFF library. See above. If you want to build the tiff +# converters, you must have the tiff library already installed. + +TIFFLIB = NONE +TIFFHDR_DIR = + +#TIFFLIB = libtiff.so +#TIFFHDR_DIR = /usr/include/libtiff +#NetBSD: +#TIFFLIB = $(LOCALBASE)/lib/libtiff.so +#TIFFHDR_DIR = $(LOCALBASE)/include +# OSF, Tru64: +#TIFFLIB = /usr/local1/DEC/lib/libtiff.so +#TIFFHDR_DIR = /usr/local1/DEC/include + +# If your Tiff library depends on libraries other than libc and libm, +# put the required linker options here. +TIFFLIB_LDFLAGS = +# John Milton <jmilton@fundsxpress.com> in September 2000 and +# John Bartelt <bartelt@SLAC.Stanford.EDU> in August 2002 reported +# needing libz with libtiff 3.5.5 (with and without LZW patch): +#TIFFLIB_LDFLAGS = -lz + +# The JPEG library. See above. If you want to build the jpeg +# converters you must have the jpeg library already installed. + +# Tiff files can use JPEG compression, so the Tiff library can reference +# the JPEG library. If your Tiff library references a dynamic JPEG +# library, you must specify at least JPEGLIB here, or the Tiff +# converters will not build. Note that your Tiff library may have the +# JPEG stuff statically linked in, in which case you won't need +# JPEGLIB in order to build the Tiff converters. + +JPEGLIB = NONE +JPEGHDR_DIR = +#JPEGLIB = libjpeg.so +#JPEGHDR_DIR = /usr/include/jpeg +# Netbsd: +#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so +#JPEGHDR_DIR = ${LOCALBASE}/include +# OSF, Tru64: +#JPEGLIB = /usr/local1/DEC/libjpeg.so +#JPEGHDR_DIR = /usr/local1/DEC/include +# Typical: +#JPEGLIB = /usr/local/lib/libjpeg.so +#JPEGHDR_DIR = /usr/local/include +# Don't build JPEG stuff: +#JPEGLIB = NONE + + +# The PNG library. See above. If you want to build the PNG +# converters you must have the PNG library already installed. + +# The PNG library, by convention starting around April 2002, gets installed +# with names that include a version number, such as libpng10.a and header +# files in /usr/include/libpng10. +# option. +PNGLIB = NONE +PNGVER = +#PNGLIB = libpng$(PNGVER).so +#PNGHDR_DIR = /usr/include/libpng$(PNGVER) +# NetBSD: +#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so +#PNGHDR_DIR = $(LOCALBASE)/include +# OSF/Tru64: +#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so +#PNGHDR_DIR = /usr/local1/DEC/include + +# The zlib compression library. See above. You need it to build +# anything that needs the PNG library (see above). If you selected +# NONE for the PNG library, it doesn't matter what you specify here -- +# it won't get used. + +ZLIB = NONE +ZHDR_DIR = +#ZLIB = libz.so + +# The JBIG lossless image compression library (aka JBIG-KIT): + +JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a +JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig + +# The Jasper JPEG-2000 image compression library (aka JasPer): +JASPERLIB = $(INTERNAL_JASPERLIB) +JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR) + +# And the Utah Raster Toolkit (aka URT aka RLE) library: + +URTLIB = $(BUILDDIR)/urt/librle.a +URTHDR_DIR = $(SRCDIR)/urt + +# The Linux SVGA library (Svgalib) is a facility for displaying graphics +# on the Linux console. It is required by Ppmsvgalib. + +LINUXSVGALIB = NONE +LINUXSVGAHDR_DIR = + +#LINUXSVGALIB_DIR = +#LINUXSVGAHDR_DIR = /usr/include/vgalib + +# These are -l options to link in the network libraries. Often, these are +# built into the standard C library, so this can be null. If you don't +# want any network functions, make it NONE. The only thing that requires +# network functions is the option in ppmtompeg to run it on multiple +# computers simultaneously. + +NETWORKLD = +# Solaris, SunOS: +#NETWORKLD = -lsocket -lnsl +# SCO: +#NETWORKLD = -lsocket, -lresolv +# Don't build network functions: +#DJGPP/Windows, Tru64: +# (there's some minor header problem that prevents network functions from +# building on Tru64 2000.10.06) +#NETWORKLD = NONE + +VMS = +#VMS: +#VMS = yes + +# The following variables are used only by 'make install' (and the +# variants of it). Paths here don't, for example, get built into any +# programs. + +# File permissions for installed files. +# Note that on some systems (e.g. Solaris), 'install' can't use the +# mnemonic permissions - you have to use octal. + +# binaries (pbmmake, etc) +INSTALL_PERM_BIN = 755 # u=rwx,go=rx +# shared libraries (libpbm.so, etc) +INSTALL_PERM_LIBD = 755 # u=rwx,go=rx +# static libraries (libpbm.a, etc) +INSTALL_PERM_LIBS = 644 # u=rw,go=r +# header files (pbm.h, etc) +INSTALL_PERM_HDR = 644 # u=rw,go=r +# man pages (pbmmake.1, etc) +INSTALL_PERM_MAN = 644 # u=rw,go=r +# data files (pnmtopalm color maps, etc) +INSTALL_PERM_DATA = 644 # u=rw,go=r + +# Specify the suffix that want the man pages to have. + +SUFFIXMANUALS1 = 1 +SUFFIXMANUALS3 = 3 +SUFFIXMANUALS5 = 5 + +#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the +#Netpbm library functions. The value is used only in make file tests. +# "unixshared" means a unix-style shared library, typically named like +# libxyz.so.2.3 +NETPBMLIBTYPE = unixshared +# "unixstatic" means a unix-style static library, (like libxyz.a) +#NETPBMLIBTYPE = unixstatic +# "dll" means a Windows DLL shared library +#NETPBMLIBTYPE = dll +# "dylib" means a Darwin/Mac OS shared library +#NETPBMLIBTYPE = dylib + +#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is +#selected above. All this is used for is to construct library names. +#The make files never examine the actual value. +NETPBMLIBSUFFIX = so +# "a" is the suffix for unix-style static libraries. Also for AIX shared +# libraries. +#NETPBMLIBSUFFIX = a +# For HP-UX shared libraries: +#NETPBMLIBSUFFIX = sl +# Darwin/Mac OS shared library: +#NETPBMLIBSUFFIX = dylib +# Windows shared library: +#NETPBMLIBSUFFIX = dll + +#STATICLIB_TOO is "y" to signify that you want a static library built +#and installed in addition to whatever library type you specified by +#NETPBMLIBTYPE. If NETPBMLIBTYPE specified a static library, +#STATICLIB_TOO simply has no effect. +STATICLIB_TOO = y +#STATICLIB_TOO = n + +#STATICLIBSUFFIX is the suffix that static libraries have. It's +#meaningless if you aren't building static libraries. +STATICLIBSUFFIX = a + +#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename +#of a shared library may have on this system. Traditionally, it's +#just "lib", as in libc or libpbm. On Windows, though, varying +#prefixes are used when multiple alternative forms of a library are +#available. The first prefix in this list is what we use to name the +#Netpbm shared libraries. +SHLIBPREFIXLIST = lib +#Cygwin: +#SHLIBPREFIXLIST = cyg lib + +NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST)) + +#DLLVER is used to version the DLLs built on cygwin or other +#windowsish platforms. We can't add this to LIBROOT, or we'd +#version the static libs (which is bad). We can't add this +#at the end of the name (like unix does with so numbers) because +#windows will only load dlls whose name ends in "dll". So, +#we have this variable, which becomes the end of the library "root" name +#for DLLs only. +DLLVER = +#Cygwin +#DLLVER = $(NETPBM_MAJOR_RELEASE) + +#NETPBM_DOCURL is the URL of the main documentation page for Netpbm. +#This is a directory which contains a file for each Netpbm program, +#library, and file type. E.g. The documentation for jpegtopnm might be in +#http://netpbm.sourceforge.net/doc/jpegtopnm.html . This value gets +#installed in the man pages (which say no more than to read the webpage) +#and in the Webman netpbm.url file. +NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/ +#For a system with no web access, but a local copy of the doc: +#NETPBM_DOCURL = file:/usr/doc/netpbm/ + +# This is where everything goes when you do 'make package': +PKGDIR = /tmp/netpbm + + + +####Lines above were copied from Makefile.config.in by 'configure'. +####Lines below were added by 'configure' based on the GNU platform. +DEFAULT_TARGET = nonmerge +NETPBMLIBTYPE=unixshared +NETPBMLIBSUFFIX=so +STATICLIB_TOO=n +CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings +CFLAGS_MERGE = -Wno-missing-declarations +TIFFLIB = libtiff.so +JPEGLIB = libjpeg.so +PNGLIB = libpng.so +ZLIB = libz.so +LINUXSVGAHDR_DIR = /usr/include +LINUXSVGALIB = /usr/lib/libvga.so |